April 2024 | ||||||
Mo | Tu | We | Th | Fr | Sa | Su |
1 | 2 | 3 | 4 | 5 | 6 | 7 |
8 | 9 | 10 | 11 | 12 | 13 | 14 |
15 | 16 | 17 | 18 | 19 | 20 | 21 |
22 | 23 | 24 | 25 | 26 | 27 | 28 |
29 | 30 | 1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 10 | 11 | 12 |
The output of each script is buffered and written when the script exits, so output lines of different scripts won't mix. You can modify this behaviour by setting a timeout.
The timeout set with the -t option is used as buffer timeout. If the output buffer of a script is not empty and the last output was timeout seconds ago, startpar will flush the buffer.
The -T option timeout works more globally. If no output is printed for more than global_timeout seconds, startpar will flush the buffer of the script with the oldest output. Afterwards it will only print output of this script until it is finished.
The -M option switches startpar into a make(1) like behaviour. This option takes three different arguments: boot, start, and stop for reading .depend.boot or .depend.start or .depend.stop respectively in the directory /etc/init.d/. By scanning the boot and runlevel directories in /etc/init.d/ it then executes the appropriate scripts in parallel.