Dr Andrew Scott
G7VAV
Senior Lecturer
School of Computing
and Communications
D35 InfoLab21
Lancaster University
Lancaster, LA1 4WA
United Kingdom
School of Computing
and Communications
D35 InfoLab21
Lancaster University
Lancaster, LA1 4WA
United Kingdom
| April 2024 | ||||||
| Mo | Tu | We | Th | Fr | Sa | Su |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| 29 | 30 | 1 | 2 | 3 | 4 | 5 |
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
PAM_FAILDELAY
Section: Linux-PAM Manual (8)Updated: 06/04/2011
Index Return to Main Contents
NAME
pam_faildelay - Change the delay on failure per-applicationSYNOPSIS
- pam_faildelay.so [debug] [delay=microseconds]
DESCRIPTION
If no delay is given, pam_faildelay will use the value of FAIL_DELAY from /etc/login.defs.
OPTIONS
debug
- Turns on debugging messages sent to syslog.
delay=N
- Set the delay on failure to N microseconds.
MODULE TYPES PROVIDED
Only the auth module type is provided.
RETURN VALUES
PAM_IGNORE
- Delay was successful adjusted.
PAM_SYSTEM_ERR
- The specified delay was not valid.
EXAMPLES
The following example will set the delay on failure to 10 seconds:
-
auth optional pam_faildelay.so delay=10000000
SEE ALSO
pam_fail_delay(3), pam.conf(5), pam.d(5), pam(7)
AUTHOR
pam_faildelay was written by Darren Tucker <dtucker@zip.com.au>.
Index
for client
3.138.204.208
© Andrew Scott 2006 -
2024,
All Rights Reserved
All Rights Reserved
Andrew Scott