Dr Andrew Scott G7VAV

My photo
 
March 2024
Mo Tu We Th Fr Sa Su
26 27 28 29 1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
1 2 3 4 5 6 7


NET

Section: System Administration tools (8)
Updated: 01/22/2012
Index Return to Main Contents
 

NAME

net - Tool for administration of Samba and remote CIFS servers.  

SYNOPSIS

net {<ads|rap|rpc>} [-h] [-w workgroup] [-W myworkgroup] [-U user] [-I ip-address] [-p port] [-n myname] [-s conffile] [-S server] [-l] [-P] [-d debuglevel] [-V] [--request-timeout seconds]
 

DESCRIPTION

This tool is part of the samba(7) suite.

The Samba net utility is meant to work just like the net utility available for windows and DOS. The first argument should be used to specify the protocol to use when executing a certain command. ADS is used for ActiveDirectory, RAP is using for old (Win9x/NT3) clients and RPC can be used for NT4 and Windows 2000. If this argument is omitted, net will try to determine it automatically. Not all commands are available on all protocols.  

OPTIONS

-h|--help

Print a summary of command line options.

-k|--kerberos

Try to authenticate with kerberos. Only useful in an Active Directory environment.

-w target-workgroup

Sets target workgroup or domain. You have to specify either this option or the IP address or the name of a server.

-W workgroup

Sets client workgroup or domain

-U user

User name to use

-I ip-address

IP address of target server to use. You have to specify either this option or a target workgroup or a target server.

-p port

Port on the target server to connect to (usually 139 or 445). Defaults to trying 445 first, then 139.

-n|--netbiosname <primary NetBIOS name>

This option allows you to override the NetBIOS name that Samba uses for itself. This is identical to setting the m[blue]smb.conf.5.shtml#m[] parameter in the smb.conf file. However, a command line setting will take precedence over settings in smb.conf.

-s|--configfile <configuration file>

The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide. See smb.conf for more information. The default configuration file name is determined at compile time.

-S server

Name of target server. You should specify either this option or a target workgroup or a target IP address.

-l

When listing data, give more information on each item.

-P

Make queries to the external server using the machine account of the local server.

--request-timeout 30

Let client requests timeout after 30 seconds the default is 10 seconds.

-d|--debuglevel=level

level is an integer from 0 to 10. The default value if this parameter is not specified is 0.

The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it generates a small amount of information about operations carried out.

Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

Note that specifying this parameter here will override the m[blue]smb.conf.5.shtml#m[] parameter in the smb.conf file.

 

COMMANDS

 

CHANGESECRETPW

This command allows the Samba machine account password to be set from an external application to a machine account password that has already been stored in Active Directory. DO NOT USE this command unless you know exactly what you are doing. The use of this command requires that the force flag (-f) be used also. There will be NO command prompt. Whatever information is piped into stdin, either by typing at the command line or otherwise, will be stored as the literal machine password. Do NOT use this without care and attention as it will overwrite a legitimate machine password without warning. YOU HAVE BEEN WARNED.  

TIME

The NET TIME command allows you to view the time on a remote server or synchronise the time on the local server with the time on the remote server.  

TIME

Without any options, the NET TIME command displays the time on the remote server.  

TIME SYSTEM

Displays the time on the remote server in a format ready for /bin/date.  

TIME SET

Tries to set the date and time of the local server to that on the remote server using /bin/date.  

TIME ZONE

Displays the timezone in hours from GMT on the remote computer.  

[RPC|ADS] JOIN [TYPE] [-U username[%password]] [createupn=UPN] [createcomputer=OU] [options]

Join a domain. If the account already exists on the server, and [TYPE] is MEMBER, the machine will attempt to join automatically. (Assuming that the machine has been created in server manager) Otherwise, a password will be prompted for, and a new account may be created.

[TYPE] may be PDC, BDC or MEMBER to specify the type of server joining the domain.

[UPN] (ADS only) set the principalname attribute during the join. The default format is host/netbiosname@REALM.

[OU] (ADS only) Precreate the computer account in a specific OU. The OU string reads from top to bottom without RDNs, and is delimited by a '/'. Please note that '\' is used for escape by both the shell and ldap, so it may need to be doubled or quadrupled to pass through, and it is not used as a delimiter.  

[RPC] OLDJOIN [options]

Join a domain. Use the OLDJOIN option to join the domain using the old style of domain joining - you need to create a trust account in server manager first.  

[RPC|ADS] USER

 

[RPC|ADS] USER

List all users  

[RPC|ADS] USER DELETE target

Delete specified user  

[RPC|ADS] USER INFO target

List the domain groups of the specified user.  

[RPC|ADS] USER RENAME oldname newname

Rename specified user.  

[RPC|ADS] USER ADD name [password] [-F user flags] [-C comment]

Add specified user.  

[RPC|ADS] GROUP

 

[RPC|ADS] GROUP [misc options] [targets]

List user groups.  

[RPC|ADS] GROUP DELETE name [misc. options]

Delete specified group.  

[RPC|ADS] GROUP ADD name [-C comment]

Create specified group.  

[RAP|RPC] SHARE

 

[RAP|RPC] SHARE [misc. options] [targets]

Enumerates all exported resources (network shares) on target server.  

[RAP|RPC] SHARE ADD name=serverpath [-C comment] [-M maxusers] [targets]

Adds a share from a server (makes the export active). Maxusers specifies the number of users that can be connected to the share simultaneously.  

SHARE DELETE sharename

Delete specified share.  

[RPC|RAP] FILE

 

[RPC|RAP] FILE

List all open files on remote server.  

[RPC|RAP] FILE CLOSE fileid

Close file with specified fileid on remote server.  

[RPC|RAP] FILE INFO fileid

Print information on specified fileid. Currently listed are: file-id, username, locks, path, permissions.  

[RAP|RPC] FILE USER user

List files opened by specified user. Please note that net rap file user does not work against Samba servers.  

SESSION

 

RAP SESSION

Without any other options, SESSION enumerates all active SMB/CIFS sessions on the target server.  

RAP SESSION DELETE|CLOSE CLIENT_NAME

Close the specified sessions.  

RAP SESSION INFO CLIENT_NAME

Give a list with all the open files in specified session.  

RAP SERVER DOMAIN

List all servers in specified domain or workgroup. Defaults to local domain.  

RAP DOMAIN

Lists all domains and workgroups visible on the current network.  

RAP PRINTQ

 

RAP PRINTQ INFO QUEUE_NAME

Lists the specified print queue and print jobs on the server. If the QUEUE_NAME is omitted, all queues are listed.  

RAP PRINTQ DELETE JOBID

Delete job with specified id.  

RAP VALIDATE user [password]

Validate whether the specified user can log in to the remote server. If the password is not specified on the commandline, it will be prompted.


Note

Currently NOT implemented.

 

RAP GROUPMEMBER

 

RAP GROUPMEMBER LIST GROUP

List all members of the specified group.  

RAP GROUPMEMBER DELETE GROUP USER

Delete member from group.  

RAP GROUPMEMBER ADD GROUP USER

Add member to group.  

RAP ADMIN command

Execute the specified command on the remote server. Only works with OS/2 servers.


Note

Currently NOT implemented.

 

RAP SERVICE

 

RAP SERVICE START NAME [arguments...]

Start the specified service on the remote server. Not implemented yet.


Note

Currently NOT implemented.

 

RAP SERVICE STOP

Stop the specified service on the remote server.


Note

Currently NOT implemented.

 

RAP PASSWORD USER OLDPASS NEWPASS

Change password of USER from OLDPASS to NEWPASS.  

LOOKUP

 

LOOKUP HOST HOSTNAME [TYPE]

Lookup the IP address of the given host with the specified type (netbios suffix). The type defaults to 0x20 (workstation).  

LOOKUP LDAP [DOMAIN]

Give IP address of LDAP server of specified DOMAIN. Defaults to local domain.  

LOOKUP KDC [REALM]

Give IP address of KDC for the specified REALM. Defaults to local realm.  

LOOKUP DC [DOMAIN]

Give IP's of Domain Controllers for specified DOMAIN. Defaults to local domain.  

LOOKUP MASTER DOMAIN

Give IP of master browser for specified DOMAIN or workgroup. Defaults to local domain.  

CACHE

Samba uses a general caching interface called 'gencache'. It can be controlled using 'NET CACHE'.

All the timeout parameters support the suffixes:

s - Seconds
m - Minutes
h - Hours
d - Days
w - Weeks
 

CACHE ADD key data time-out

Add specified key+data to the cache with the given timeout.  

CACHE DEL key

Delete key from the cache.  

CACHE SET key data time-out

Update data of existing cache entry.  

CACHE SEARCH PATTERN

Search for the specified pattern in the cache data.  

CACHE LIST

List all current items in the cache.  

CACHE FLUSH

Remove all the current items from the cache.  

GETLOCALSID [DOMAIN]

Prints the SID of the specified domain, or if the parameter is omitted, the SID of the local server.  

SETLOCALSID S-1-5-21-x-y-z

Sets SID for the local server to the specified SID.  

GETDOMAINSID

Prints the local machine SID and the SID of the current domain.  

SETDOMAINSID

Sets the SID of the current domain.  

GROUPMAP

Manage the mappings between Windows group SIDs and UNIX groups. Common options include:

• unixgroup - Name of the UNIX group

• ntgroup - Name of the Windows NT group (must be resolvable to a SID

• rid - Unsigned 32-bit integer

• sid - Full SID in the form of "S-1-..."

• type - Type of the group; either 'domain', 'local', or 'builtin'

• comment - Freeform text description of the group

 

GROUPMAP ADD

Add a new group mapping entry:

net groupmap add {rid=int|sid=string} unixgroup=string \
        [type={domain|local}] [ntgroup=string] [comment=string]

 

GROUPMAP DELETE

Delete a group mapping entry. If more than one group name matches, the first entry found is deleted.

net groupmap delete {ntgroup=string|sid=SID}  

GROUPMAP MODIFY

Update en existing group entry.

net groupmap modify {ntgroup=string|sid=SID} [unixgroup=string] \
       [comment=string] [type={domain|local}]

 

GROUPMAP LIST

List existing group mapping entries.

net groupmap list [verbose] [ntgroup=string] [sid=SID]  

MAXRID

Prints out the highest RID currently in use on the local server (by the active 'passdb backend').  

RPC INFO

Print information about the domain of the remote server, such as domain name, domain sid and number of users and groups.  

[RPC|ADS] TESTJOIN

Check whether participation in a domain is still valid.  

[RPC|ADS] CHANGETRUSTPW

Force change of domain trust password.  

RPC TRUSTDOM

 

RPC TRUSTDOM ADD DOMAIN

Add a interdomain trust account for DOMAIN. This is in fact a Samba account named DOMAIN$ with the account flag 'I' (interdomain trust account). This is required for incoming trusts to work. It makes Samba be a trusted domain of the foreign (trusting) domain. Users of the Samba domain will be made available in the foreign domain. If the command is used against localhost it has the same effect as smbpasswd -a -i DOMAIN. Please note that both commands expect a appropriate UNIX account.  

RPC TRUSTDOM DEL DOMAIN

Remove interdomain trust account for DOMAIN. If it is used against localhost it has the same effect as smbpasswd -x DOMAIN$.  

RPC TRUSTDOM ESTABLISH DOMAIN

Establish a trust relationship to a trusted domain. Interdomain account must already be created on the remote PDC. This is required for outgoing trusts to work. It makes Samba be a trusting domain of a foreign (trusted) domain. Users of the foreign domain will be made available in our domain. You'll need winbind and a working idmap config to make them appear in your system.  

RPC TRUSTDOM REVOKE DOMAIN

Abandon relationship to trusted domain  

RPC TRUSTDOM LIST

List all interdomain trust relationships.  

RPC TRUSTDOM LIST

List all interdomain trust relationships.  

RPC TRUST

 

RPC TRUST CREATE

Create a trust trust object by calling lsaCreateTrustedDomainEx2. The can be done on a single server or on two servers at once with the possibility to use a random trust password.

Options:

otherserver

Domain controller of the second domain

otheruser

Admin user in the second domain

otherdomainsid

SID of the second domain

other_netbios_domain

NetBIOS (short) name of the second domain

otherdomain

DNS (full) name of the second domain

trustpw

Trust password

Examples:

Create a trust object on srv1.dom1.dom for the domain dom2

net rpc trust create \
    otherdomainsid=S-x-x-xx-xxxxxxxxxx-xxxxxxxxxx-xxxxxxxxx \
    other_netbios_domain=dom2 \
    otherdomain=dom2.dom \
    trustpw=12345678 \
    -S srv1.dom1.dom

Create a trust relationship between dom1 and dom2

net rpc trust create \
    otherserver=srv2.dom2.test \
    otheruser=dom2adm \
    -S srv1.dom1.dom
 

RPC TRUST DELETE

Delete a trust trust object by calling lsaDeleteTrustedDomain. The can be done on a single server or on two servers at once.

Options:

otherserver

Domain controller of the second domain

otheruser

Admin user in the second domain

otherdomainsid

SID of the second domain

Examples:

Delete a trust object on srv1.dom1.dom for the domain dom2

net rpc trust delete \
    otherdomainsid=S-x-x-xx-xxxxxxxxxx-xxxxxxxxxx-xxxxxxxxx \
    -S srv1.dom1.dom

Delete a trust relationship between dom1 and dom2

net rpc trust delete \
    otherserver=srv2.dom2.test \
    otheruser=dom2adm \
    -S srv1.dom1.dom
 

 

RPC RIGHTS

This subcommand is used to view and manage Samba's rights assignments (also referred to as privileges). There are three options currently available: list, grant, and revoke. More details on Samba's privilege model and its use can be found in the Samba-HOWTO-Collection.  

RPC ABORTSHUTDOWN

Abort the shutdown of a remote server.  

RPC SHUTDOWN [-t timeout] [-r] [-f] [-C message]

Shut down the remote server.

-r

Reboot after shutdown.

-f

Force shutting down all applications.

-t timeout

Timeout before system will be shut down. An interactive user of the system can use this time to cancel the shutdown.

-C message

Display the specified message on the screen to announce the shutdown.
 

RPC SAMDUMP

Print out sam database of remote server. You need to run this against the PDC, from a Samba machine joined as a BDC.  

RPC VAMPIRE

Export users, aliases and groups from remote server to local server. You need to run this against the PDC, from a Samba machine joined as a BDC.  

RPC VAMPIRE KEYTAB

Dump remote SAM database to local Kerberos keytab file.  

RPC VAMPIRE LDIF

Dump remote SAM database to local LDIF file or standard output.  

RPC GETSID

Fetch domain SID and store it in the local secrets.tdb.  

ADS LEAVE

Make the remote host leave the domain it is part of.  

ADS STATUS

Print out status of machine account of the local machine in ADS. Prints out quite some debug info. Aimed at developers, regular users should use NET ADS TESTJOIN.  

ADS PRINTER

 

ADS PRINTER INFO [PRINTER] [SERVER]

Lookup info for PRINTER on SERVER. The printer name defaults to "*", the server name defaults to the local host.  

ADS PRINTER PUBLISH PRINTER

Publish specified printer using ADS.  

ADS PRINTER REMOVE PRINTER

Remove specified printer from ADS directory.  

ADS SEARCH EXPRESSION ATTRIBUTES...

Perform a raw LDAP search on a ADS server and dump the results. The expression is a standard LDAP search expression, and the attributes are a list of LDAP fields to show in the results.

Example: net ads search '(objectCategory=group)' sAMAccountName  

ADS DN DN (attributes)

Perform a raw LDAP search on a ADS server and dump the results. The DN standard LDAP DN, and the attributes are a list of LDAP fields to show in the result.

Example: net ads dn 'CN=administrator,CN=Users,DC=my,DC=domain' SAMAccountName  

ADS WORKGROUP

Print out workgroup name for specified kerberos realm.  

SAM CREATEBUILTINGROUP <NAME>

(Re)Create a BUILTIN group. Only a wellknown set of BUILTIN groups can be created with this command. This is the list of currently recognized group names: Administrators, Users, Guests, Power Users, Account Operators, Server Operators, Print Operators, Backup Operators, Replicator, RAS Servers, Pre-Windows 2000 compatible Access. This command requires a running Winbindd with idmap allocation properly configured. The group gid will be allocated out of the winbindd range.  

SAM CREATELOCALGROUP <NAME>

Create a LOCAL group (also known as Alias). This command requires a running Winbindd with idmap allocation properly configured. The group gid will be allocated out of the winbindd range.  

SAM DELETELOCALGROUP <NAME>

Delete an existing LOCAL group (also known as Alias).  

SAM MAPUNIXGROUP <NAME>

Map an existing Unix group and make it a Domain Group, the domain group will have the same name.  

SAM UNMAPUNIXGROUP <NAME>

Remove an existing group mapping entry.  

SAM ADDMEM <GROUP> <MEMBER>

Add a member to a Local group. The group can be specified only by name, the member can be specified by name or SID.  

SAM DELMEM <GROUP> <MEMBER>

Remove a member from a Local group. The group and the member must be specified by name.  

SAM LISTMEM <GROUP>

List Local group members. The group must be specified by name.  

SAM LIST <users|groups|localgroups|builtin|workstations> [verbose]

List the specified set of accounts by name. If verbose is specified, the rid and description is also provided for each account.  

SAM RIGHTS LIST

List all available privileges.  

SAM RIGHTS GRANT <NAME> <PRIVILEGE>

Grant one or more privileges to a user.  

SAM RIGHTS REVOKE <NAME> <PRIVILEGE>

Revoke one or more privileges from a user.  

SAM SHOW <NAME>

Show the full DOMAIN\\NAME the SID and the type for the corresponding account.  

SAM SET HOMEDIR <NAME> <DIRECTORY>

Set the home directory for a user account.  

SAM SET PROFILEPATH <NAME> <PATH>

Set the profile path for a user account.  

SAM SET COMMENT <NAME> <COMMENT>

Set the comment for a user or group account.  

SAM SET FULLNAME <NAME> <FULL NAME>

Set the full name for a user account.  

SAM SET LOGONSCRIPT <NAME> <SCRIPT>

Set the logon script for a user account.  

SAM SET HOMEDRIVE <NAME> <DRIVE>

Set the home drive for a user account.  

SAM SET WORKSTATIONS <NAME> <WORKSTATIONS>

Set the workstations a user account is allowed to log in from.  

SAM SET DISABLE <NAME>

Set the "disabled" flag for a user account.  

SAM SET PWNOTREQ <NAME>

Set the "password not required" flag for a user account.  

SAM SET AUTOLOCK <NAME>

Set the "autolock" flag for a user account.  

SAM SET PWNOEXP <NAME>

Set the "password do not expire" flag for a user account.  

SAM SET PWDMUSTCHANGENOW <NAME> [yes|no]

Set or unset the "password must change" flag for a user account.  

SAM POLICY LIST

List the available account policies.  

SAM POLICY SHOW <account policy>

Show the account policy value.  

SAM POLICY SET <account policy> <value>

Set a value for the account policy. Valid values can be: "forever", "never", "off", or a number.  

SAM PROVISION

Only available if ldapsam:editposix is set and winbindd is running. Properly populates the ldap tree with the basic accounts (Administrator) and groups (Domain Users, Domain Admins, Domain Guests) on the ldap tree.  

IDMAP DUMP <local tdb file name>

Dumps the mappings contained in the local tdb file specified. This command is useful to dump only the mappings produced by the idmap_tdb backend.  

IDMAP RESTORE [input file]

Restore the mappings from the specified file or stdin.  

IDMAP SECRET <DOMAIN> <secret>

Store a secret for the specified domain, used primarily for domains that use idmap_ldap as a backend. In this case the secret is used as the password for the user DN used to bind to the ldap server.  

IDMAP DELETE [-f] [--db=<DB>] <ID>

Delete a mapping sid <-> gid or sid <-> uid from the IDMAP database. The mapping is given by <ID> which may either be a sid: S-x-..., a gid: "GID number" or a uid: "UID number". Use -f to delete an invalid partial mapping <ID> -> xx

Use "smbcontrol all idmap ..." to notify running smbd instances. See the smbcontrol(1) manpage for details.  

IDMAP CHECK [-v] [-r] [-a] [-T] [-f] [-l] [--db=<DB>]

Check and repair the IDMAP database. If no option is given a read only check of the database is done. Among others an interactive or automatic repair mode may be chosen with one of the following options:

-r|--repair

Interactive repair mode, ask a lot of questions.

-a|--auto

Noninteractive repair mode, use default answers.

-v|--verbose

Produce more output.

-f|--force

Try to apply changes, even if they do not apply cleanly.

-T|--test

Dry run, show what changes would be made but don't touch anything.

-l|--lock

Lock the database while doing the check.

--db <DB>

Check the specified database.

It reports about the finding of the following errors:

Missing reverse mapping:

A record with mapping A->B where there is no B->A. Default action in repair mode is to "fix" this by adding the reverse mapping.

Invalid mapping:

A record with mapping A->B where B->C. Default action is to "delete" this record.

Missing or invalid HWM:

A high water mark is not at least equal to the largest ID in the database. Default action is to "fix" this by setting it to the largest ID found +1.

Invalid record:

Something we failed to parse. Default action is to "edit" it in interactive and "delete" it in automatic mode.
 

USERSHARE

Starting with version 3.0.23, a Samba server now supports the ability for non-root users to add user-defined shares to be exported using the "net usershare" commands.

Members of the UNIX group "sambashare" can create user-defined shares on demand using the commands below.

The usershare commands are:

net usershare add sharename path [comment [acl] [guest_ok=[y|n]]] - to add or change a user defined share.
net usershare delete sharename - to delete a user defined share.
net usershare info [-l|--long] [wildcard sharename] - to print info about a user defined share.
net usershare list [-l|--long] [wildcard sharename] - to list user defined shares.
 

USERSHARE ADD sharename path [comment] [acl] [guest_ok=[y|n]]

Add or replace a new user defined share, with name "sharename".

"path" specifies the absolute pathname on the system to be exported. Restrictions may be put on this, see the global smb.conf parameters: "usershare owner only", "usershare prefix allow list", and "usershare prefix deny list".

The optional "comment" parameter is the comment that will appear on the share when browsed to by a client.

The optional "acl" field specifies which users have read and write access to the entire share. Note that guest connections are not allowed unless the smb.conf parameter "usershare allow guests" has been set. The definition of a user defined share acl is: "user:permission", where user is a valid username on the system and permission can be "F", "R", or "D". "F" stands for "full permissions", ie. read and write permissions. "D" stands for "deny" for a user, ie. prevent this user from accessing this share. "R" stands for "read only", ie. only allow read access to this share (no creation of new files or directories or writing to files).

The default if no "acl" is given is "Everyone:R", which means any authenticated user has read-only access.

The optional "guest_ok" has the same effect as the parameter of the same name in smb.conf, in that it allows guest access to this user defined share. This parameter is only allowed if the global parameter "usershare allow guests" has been set to true in the smb.conf.

There is no separate command to modify an existing user defined share, just use the "net usershare add [sharename]" command using the same sharename as the one you wish to modify and specify the new options you wish. The Samba smbd daemon notices user defined share modifications at connect time so will see the change immediately, there is no need to restart smbd on adding, deleting or changing a user defined share.  

USERSHARE DELETE sharename

Deletes the user defined share by name. The Samba smbd daemon immediately notices this change, although it will not disconnect any users currently connected to the deleted share.  

USERSHARE INFO [-l|--long] [wildcard sharename]

Get info on user defined shares owned by the current user matching the given pattern, or all users.

net usershare info on its own dumps out info on the user defined shares that were created by the current user, or restricts them to share names that match the given wildcard pattern ('*' matches one or more characters, '?' matches only one character). If the '-l' or '--long' option is also given, it prints out info on user defined shares created by other users.

The information given about a share looks like: [foobar] path=/home/jeremy comment=testme usershare_acl=Everyone:F guest_ok=n And is a list of the current settings of the user defined share that can be modified by the "net usershare add" command.  

USERSHARE LIST [-l|--long] wildcard sharename

List all the user defined shares owned by the current user matching the given pattern, or all users.

net usershare list on its own list out the names of the user defined shares that were created by the current user, or restricts the list to share names that match the given wildcard pattern ('*' matches one or more characters, '?' matches only one character). If the '-l' or '--long' option is also given, it includes the names of user defined shares created by other users.  

CONF

Starting with version 3.2.0, a Samba server can be configured by data stored in registry. This configuration data can be edited with the new "net conf" commands.

The deployment of this configuration data can be activated in two levels from the smb.conf file: Share definitions from registry are activated by setting registry shares to "yes" in the [global] section and global configuration options are activated by setting m[blue]include = registrym[] in the [global] section for a mixed configuration or by setting m[blue]config backend = registrym[] in the [global] section for a registry-only configuration. See the smb.conf(5) manpage for details.

The conf commands are:

net conf list - Dump the complete configuration in smb.conf like format.
net conf import - Import configuration from file in smb.conf format.
net conf listshares - List the registry shares.
net conf drop - Delete the complete configuration from registry.
net conf showshare - Show the definition of a registry share.
net conf addshare - Create a new registry share.
net conf delshare - Delete a registry share.
net conf setparm - Store a parameter.
net conf getparm - Retrieve the value of a parameter.
net conf delparm - Delete a parameter.
net conf getincludes - Show the includes of a share definition.
net conf setincludes - Set includes for a share.
net conf delincludes - Delete includes from a share definition.
 

CONF LIST

Print the configuration data stored in the registry in a smb.conf-like format to standard output.  

CONF IMPORT [--test|-T] filename [section]

This command imports configuration from a file in smb.conf format. If a section encountered in the input file is present in registry, its contents is replaced. Sections of registry configuration that have no counterpart in the input file are not affected. If you want to delete these, you will have to use the "net conf drop" or "net conf delshare" commands. Optionally, a section may be specified to restrict the effect of the import command to that specific section. A test mode is enabled by specifying the parameter "-T" on the commandline. In test mode, no changes are made to the registry, and the resulting configuration is printed to standard output instead.  

CONF LISTSHARES

List the names of the shares defined in registry.  

CONF DROP

Delete the complete configuration data from registry.  

CONF SHOWSHARE sharename

Show the definition of the share or section specified. It is valid to specify "global" as sharename to retrieve the global configuration options from registry.  

CONF ADDSHARE sharename path [writeable={y|N} [guest_ok={y|N} [comment]]]

Create a new share definition in registry. The sharename and path have to be given. The share name may not be "global". Optionally, values for the very common options "writeable", "guest ok" and a "comment" may be specified. The same result may be obtained by a sequence of "net conf setparm" commands.  

CONF DELSHARE sharename

Delete a share definition from registry.  

CONF SETPARM section parameter value

Store a parameter in registry. The section may be global or a sharename. The section is created if it does not exist yet.  

CONF GETPARM section parameter

Show a parameter stored in registry.  

CONF DELPARM section parameter

Delete a parameter stored in registry.  

CONF GETINCLUDES section

Get the list of includes for the provided section (global or share).

Note that due to the nature of the registry database and the nature of include directives, the includes need special treatment: Parameters are stored in registry by the parameter name as valuename, so there is only ever one instance of a parameter per share. Also, a specific order like in a text file is not guaranteed. For all real parameters, this is perfectly ok, but the include directive is rather a meta parameter, for which, in the smb.conf text file, the place where it is specified between the other parameters is very important. This can not be achieved by the simple registry smbconf data model, so there is one ordered list of includes per share, and this list is evaluated after all the parameters of the share.

Further note that currently, only files can be included from registry configuration. In the future, there will be the ability to include configuration data from other registry keys.  

CONF SETINCLUDES section [filename]+

Set the list of includes for the provided section (global or share) to the given list of one or more filenames. The filenames may contain the usual smb.conf macros like %I.  

CONF DELINCLUDES section

Delete the list of includes from the provided section (global or share).  

REGISTRY

Manipulate Samba's registry.

The registry commands are:

net registry enumerate - Enumerate registry keys and values.
net registry enumerate_recursive - Enumerate registry key and its subkeys.
net registry createkey - Create a new registry key.
net registry deletekey - Delete a registry key.
net registry deletekey_recursive - Delete a registry key with subkeys.
net registry getvalue - Print a registry value.
net registry getvalueraw - Print a registry value (raw format).
net registry setvalue - Set a new registry value.
net registry increment - Increment a DWORD registry value under a lock.
net registry deletevalue - Delete a registry value.
net registry getsd - Get security descriptor.
net registry getsd_sdd1 - Get security descriptor in sddl format.
net registry setsd_sdd1 - Set security descriptor from sddl format string.
net registry import - Import a registration entries (.reg) file.
net registry export - Export a registration entries (.reg) file.
net registry convert - Convert a registration entries (.reg) file.
 

REGISTRY ENUMERATE key

Enumerate subkeys and values of key.  

REGISTRY ENUMERATE_RECURSIVE key

Enumerate values of key and its subkeys.  

REGISTRY CREATEKEY key

Create a new key if not yet existing.  

REGISTRY DELETEKEY key

Delete the given key and its values from the registry, if it has no subkeys.  

REGISTRY DELETEKEY_RECURSIVE key

Delete the given key and all of its subkeys and values from the registry.  

REGISTRY GETVALUE key name

Output type and actual value of the value name of the given key.  

REGISTRY GETVALUERAW key name

Output the actual value of the value name of the given key.  

REGISTRY SETVALUE key name type value ...

Set the value name of an existing key. type may be one of sz, multi_sz or dword. In case of multi_sz value may be given multiple times.  

REGISTRY INCREMENT key name [inc]

Increment the DWORD value name of key by inc while holding a g_lock. inc defaults to 1.  

REGISTRY DELETEVALUE key name

Delete the value name of the given key.  

REGISTRY GETSD key

Get the security descriptor of the given key.  

REGISTRY GETSD_SDDL key

Get the security descriptor of the given key as a Security Descriptor Definition Language (SDDL) string.  

REGISTRY SETSD_SDDL keysd

Set the security descriptor of the given key from a Security Descriptor Definition Language (SDDL) string sd.  

REGISTRY IMPORT file[opt]

Import a registration entries (.reg) file.  

REGISTRY EXPORT keyfile[opt]

Export a key to a registration entries (.reg) file.  

REGISTRY CONVERT in out [[inopt] outopt]

Convert a registration entries (.reg) file in.  

EVENTLOG

Starting with version 3.4.0 net can read, dump, import and export native win32 eventlog files (usually *.evt). evt files are used by the native Windows eventviewer tools.

The import and export of evt files can only succeed when eventlog list is used in smb.conf file. See the smb.conf(5) manpage for details.

The eventlog commands are:

net eventlog dump - Dump a eventlog *.evt file on the screen.
net eventlog import - Import a eventlog *.evt into the samba internal tdb based representation of eventlogs.
net eventlog export - Export the samba internal tdb based representation of eventlogs into an eventlog *.evt file.
 

EVENTLOG DUMP filename

Prints a eventlog *.evt file to standard output.  

EVENTLOG IMPORT filename eventlog

Imports a eventlog *.evt file defined by filename into the samba internal tdb representation of eventlog defined by eventlog. eventlog needs to part of the eventlog list defined in smb.conf. See the smb.conf(5) manpage for details.  

EVENTLOG EXPORT filename eventlog

Exports the samba internal tdb representation of eventlog defined by eventlog to a eventlog *.evt file defined by filename. eventlog needs to part of the eventlog list defined in smb.conf. See the smb.conf(5) manpage for details.  

DOM

Starting with version 3.2.0 Samba has support for remote join and unjoin APIs, both client and server-side. Windows supports remote join capabilities since Windows 2000.

In order for Samba to be joined or unjoined remotely an account must be used that is either member of the Domain Admins group, a member of the local Administrators group or a user that is granted the SeMachineAccountPrivilege privilege.

The client side support for remote join is implemented in the net dom commands which are:

net dom join - Join a remote computer into a domain.
net dom unjoin - Unjoin a remote computer from a domain.
net dom renamecomputer - Renames a remote computer joined to a domain.
 

DOM JOIN  domain=DOMAIN ou=OU account=ACCOUNT password=PASSWORD reboot

Joins a computer into a domain. This command supports the following additional parameters:

DOMAIN can be a NetBIOS domain name (also known as short domain name) or a DNS domain name for Active Directory Domains. As in Windows, it is also possible to control which Domain Controller to use. This can be achieved by appending the DC name using the \ separator character. Example: MYDOM\MYDC. The DOMAIN parameter cannot be NULL.

OU can be set to a RFC 1779 LDAP DN, like ou=mymachines,cn=Users,dc=example,dc=com in order to create the machine account in a non-default LDAP containter. This optional parameter is only supported when joining Active Directory Domains.

ACCOUNT defines a domain account that will be used to join the machine to the domain. This domain account needs to have sufficient privileges to join machines.

PASSWORD defines the password for the domain account defined with ACCOUNT.

REBOOT is an optional parameter that can be set to reboot the remote machine after successful join to the domain.

Note that you also need to use standard net parameters to connect and authenticate to the remote machine that you want to join. These additional parameters include: -S computer and -U user.

Example: net dom join -S xp -U XP\\administrator%secret domain=MYDOM account=MYDOM\\administrator password=topsecret reboot.

This example would connect to a computer named XP as the local administrator using password secret, and join the computer into a domain called MYDOM using the MYDOM domain administrator account and password topsecret. After successful join, the computer would reboot.  

DOM UNJOIN account=ACCOUNT password=PASSWORD reboot

Unjoins a computer from a domain. This command supports the following additional parameters:

ACCOUNT defines a domain account that will be used to unjoin the machine from the domain. This domain account needs to have sufficient privileges to unjoin machines.

PASSWORD defines the password for the domain account defined with ACCOUNT.

REBOOT is an optional parameter that can be set to reboot the remote machine after successful unjoin from the domain.

Note that you also need to use standard net parameters to connect and authenticate to the remote machine that you want to unjoin. These additional parameters include: -S computer and -U user.

Example: net dom unjoin -S xp -U XP\\administrator%secret account=MYDOM\\administrator password=topsecret reboot.

This example would connect to a computer named XP as the local administrator using password secret, and unjoin the computer from the domain using the MYDOM domain administrator account and password topsecret. After successful unjoin, the computer would reboot.  

DOM RENAMECOMPUTER newname=NEWNAME account=ACCOUNT password=PASSWORD reboot

Renames a computer that is joined to a domain. This command supports the following additional parameters:

NEWNAME defines the new name of the machine in the domain.

ACCOUNT defines a domain account that will be used to rename the machine in the domain. This domain account needs to have sufficient privileges to rename machines.

PASSWORD defines the password for the domain account defined with ACCOUNT.

REBOOT is an optional parameter that can be set to reboot the remote machine after successful rename in the domain.

Note that you also need to use standard net parameters to connect and authenticate to the remote machine that you want to rename in the domain. These additional parameters include: -S computer and -U user.

Example: net dom renamecomputer -S xp -U XP\\administrator%secret newname=XPNEW account=MYDOM\\administrator password=topsecret reboot.

This example would connect to a computer named XP as the local administrator using password secret, and rename the joined computer to XPNEW using the MYDOM domain administrator account and password topsecret. After successful rename, the computer would reboot.  

G_LOCK

Manage global locks.  

G_LOCK DO lockname timeout command

Execute a shell command under a global lock. This might be useful to define the order in which several shell commands will be executed. The locking information is stored in a file called g_lock.tdb. In setups with CTDB running, the locking information will be available on all cluster nodes.

LOCKNAME defines the name of the global lock.

TIMEOUT defines the timeout.

COMMAND defines the shell command to execute.
 

G_LOCK LOCKS

Print a list of all currently existing locknames.  

G_LOCK DUMP lockname

Dump the locking table of a certain global lock.  

HELP [COMMAND]

Gives usage information for the specified command.  

VERSION

This man page is complete for version 3 of the Samba suite.  

AUTHOR

The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

The net manpage was written by Jelmer Vernooij.


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
COMMANDS
CHANGESECRETPW
TIME
TIME
TIME SYSTEM
TIME SET
TIME ZONE
[RPC|ADS] JOIN [TYPE] [-U username[%password]] [createupn=UPN] [createcomputer=OU] [options]
[RPC] OLDJOIN [options]
[RPC|ADS] USER
[RPC|ADS] USER
[RPC|ADS] USER DELETE target
[RPC|ADS] USER INFO target
[RPC|ADS] USER RENAME oldname newname
[RPC|ADS] USER ADD name [password] [-F user flags] [-C comment]
[RPC|ADS] GROUP
[RPC|ADS] GROUP [misc options] [targets]
[RPC|ADS] GROUP DELETE name [misc. options]
[RPC|ADS] GROUP ADD name [-C comment]
[RAP|RPC] SHARE
[RAP|RPC] SHARE [misc. options] [targets]
[RAP|RPC] SHARE ADD name=serverpath [-C comment] [-M maxusers] [targets]
SHARE DELETE sharename
[RPC|RAP] FILE
[RPC|RAP] FILE
[RPC|RAP] FILE CLOSE fileid
[RPC|RAP] FILE INFO fileid
[RAP|RPC] FILE USER user
SESSION
RAP SESSION
RAP SESSION DELETE|CLOSE CLIENT_NAME
RAP SESSION INFO CLIENT_NAME
RAP SERVER DOMAIN
RAP DOMAIN
RAP PRINTQ
RAP PRINTQ INFO QUEUE_NAME
RAP PRINTQ DELETE JOBID
RAP VALIDATE user [password]
RAP GROUPMEMBER
RAP GROUPMEMBER LIST GROUP
RAP GROUPMEMBER DELETE GROUP USER
RAP GROUPMEMBER ADD GROUP USER
RAP ADMIN command
RAP SERVICE
RAP SERVICE START NAME [arguments...]
RAP SERVICE STOP
RAP PASSWORD USER OLDPASS NEWPASS
LOOKUP
LOOKUP HOST HOSTNAME [TYPE]
LOOKUP LDAP [DOMAIN]
LOOKUP KDC [REALM]
LOOKUP DC [DOMAIN]
LOOKUP MASTER DOMAIN
CACHE
CACHE ADD key data time-out
CACHE DEL key
CACHE SET key data time-out
CACHE SEARCH PATTERN
CACHE LIST
CACHE FLUSH
GETLOCALSID [DOMAIN]
SETLOCALSID S-1-5-21-x-y-z
GETDOMAINSID
SETDOMAINSID
GROUPMAP
GROUPMAP ADD
GROUPMAP DELETE
GROUPMAP MODIFY
GROUPMAP LIST
MAXRID
RPC INFO
[RPC|ADS] TESTJOIN
[RPC|ADS] CHANGETRUSTPW
RPC TRUSTDOM
RPC TRUSTDOM ADD DOMAIN
RPC TRUSTDOM DEL DOMAIN
RPC TRUSTDOM ESTABLISH DOMAIN
RPC TRUSTDOM REVOKE DOMAIN
RPC TRUSTDOM LIST
RPC TRUSTDOM LIST
RPC TRUST
RPC TRUST CREATE
RPC TRUST DELETE
RPC RIGHTS
RPC ABORTSHUTDOWN
RPC SHUTDOWN [-t timeout] [-r] [-f] [-C message]
RPC SAMDUMP
RPC VAMPIRE
RPC VAMPIRE KEYTAB
RPC VAMPIRE LDIF
RPC GETSID
ADS LEAVE
ADS STATUS
ADS PRINTER
ADS PRINTER INFO [PRINTER] [SERVER]
ADS PRINTER PUBLISH PRINTER
ADS PRINTER REMOVE PRINTER
ADS SEARCH EXPRESSION ATTRIBUTES...
ADS DN DN (attributes)
ADS WORKGROUP
SAM CREATEBUILTINGROUP <NAME>
SAM CREATELOCALGROUP <NAME>
SAM DELETELOCALGROUP <NAME>
SAM MAPUNIXGROUP <NAME>
SAM UNMAPUNIXGROUP <NAME>
SAM ADDMEM <GROUP> <MEMBER>
SAM DELMEM <GROUP> <MEMBER>
SAM LISTMEM <GROUP>
SAM LIST <users|groups|localgroups|builtin|workstations> [verbose]
SAM RIGHTS LIST
SAM RIGHTS GRANT <NAME> <PRIVILEGE>
SAM RIGHTS REVOKE <NAME> <PRIVILEGE>
SAM SHOW <NAME>
SAM SET HOMEDIR <NAME> <DIRECTORY>
SAM SET PROFILEPATH <NAME> <PATH>
SAM SET COMMENT <NAME> <COMMENT>
SAM SET FULLNAME <NAME> <FULL NAME>
SAM SET LOGONSCRIPT <NAME> <SCRIPT>
SAM SET HOMEDRIVE <NAME> <DRIVE>
SAM SET WORKSTATIONS <NAME> <WORKSTATIONS>
SAM SET DISABLE <NAME>
SAM SET PWNOTREQ <NAME>
SAM SET AUTOLOCK <NAME>
SAM SET PWNOEXP <NAME>
SAM SET PWDMUSTCHANGENOW <NAME> [yes|no]
SAM POLICY LIST
SAM POLICY SHOW <account policy>
SAM POLICY SET <account policy> <value>
SAM PROVISION
IDMAP DUMP <local tdb file name>
IDMAP RESTORE [input file]
IDMAP SECRET <DOMAIN> <secret>
IDMAP DELETE [-f] [--db=<DB>] <ID>
IDMAP CHECK [-v] [-r] [-a] [-T] [-f] [-l] [--db=<DB>]
USERSHARE
USERSHARE ADD sharename path [comment] [acl] [guest_ok=[y|n]]
USERSHARE DELETE sharename
USERSHARE INFO [-l|--long] [wildcard sharename]
USERSHARE LIST [-l|--long] wildcard sharename
CONF
CONF LIST
CONF IMPORT [--test|-T] filename [section]
CONF LISTSHARES
CONF DROP
CONF SHOWSHARE sharename
CONF ADDSHARE sharename path [writeable={y|N} [guest_ok={y|N} [comment]]]
CONF DELSHARE sharename
CONF SETPARM section parameter value
CONF GETPARM section parameter
CONF DELPARM section parameter
CONF GETINCLUDES section
CONF SETINCLUDES section [filename]+
CONF DELINCLUDES section
REGISTRY
REGISTRY ENUMERATE key
REGISTRY ENUMERATE_RECURSIVE key
REGISTRY CREATEKEY key
REGISTRY DELETEKEY key
REGISTRY DELETEKEY_RECURSIVE key
REGISTRY GETVALUE key name
REGISTRY GETVALUERAW key name
REGISTRY SETVALUE key name type value ...
REGISTRY INCREMENT key name [inc]
REGISTRY DELETEVALUE key name
REGISTRY GETSD key
REGISTRY GETSD_SDDL key
REGISTRY SETSD_SDDL keysd
REGISTRY IMPORT file[opt]
REGISTRY EXPORT keyfile[opt]
REGISTRY CONVERT in out [[inopt] outopt]
EVENTLOG
EVENTLOG DUMP filename
EVENTLOG IMPORT filename eventlog
EVENTLOG EXPORT filename eventlog
DOM
DOM JOIN      domain=DOMAIN ou=OU account=ACCOUNT password=PASSWORD reboot
DOM UNJOIN account=ACCOUNT password=PASSWORD reboot
DOM RENAMECOMPUTER newname=NEWNAME account=ACCOUNT password=PASSWORD reboot
G_LOCK
G_LOCK DO lockname timeout command
G_LOCK LOCKS
G_LOCK DUMP lockname
HELP [COMMAND]
VERSION
AUTHOR


for client 54.208.135.174
© Andrew Scott 2006 - 2024,
All Rights Reserved
http://www.andrew-scott.uk/
Andrew Scott
http://www.andrew-scott.co.uk/