GRUB-SETUP
Section: System Administration Utilities (8)
Updated: September 2012
Index
Return to Main Contents
NAME
grub-setup - set up a device to boot using GRUB
SYNOPSIS
grub-setup
[
OPTION...]
DEVICE
DESCRIPTION
Set up images to boot from DEVICE.
You should not normally run this program directly. Use grub-install instead.
- -a, --allow-floppy
-
Make the drive also bootable as floppy (default
for fdX devices). May break on some BIOSes.
- -b, --boot-image=FILE
-
Use FILE as the boot image [default=boot.img]
- -c, --core-image=FILE
-
Use FILE as the core image [default=core.img]
- -d, --directory=DIR
-
Use GRUB files in the directory DIR
[default=/boot/grub]
- -f, --force
-
Install even if problems are detected
- -m, --device-map=FILE
-
Use FILE as the device map
[default=/boot/grub/device.map]
- -r, --root-device=DEV
-
Use DEV as the root device [default=guessed]
- -s, --skip-fs-probe
-
Do not probe for filesystems in DEVICE
- -v, --verbose
-
Print verbose messages.
- -?, --help
-
give this help list
- --usage
-
give a short usage message
- -V, --version
-
print program version
Mandatory or optional arguments to long options are also mandatory or optional
for any corresponding short options.
DEVICE must be an OS device (e.g. /dev/sda).
REPORTING BUGS
Report bugs to <
bug-grub@gnu.org>.
SEE ALSO
grub-install(8),
grub-mkimage(1),
grub-mkrescue(1)
The full documentation for
grub-setup
is maintained as a Texinfo manual. If the
info
and
grub-setup
programs are properly installed at your site, the command
-
info grub-setup
should give you access to the complete manual.
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- REPORTING BUGS
-
- SEE ALSO
-
© Andrew Scott 2006 -
2024,
All Rights Reserved