---

---

---

L2TEST

Section: User Commands (1)
Updated: January 2012
Index Return to Main Contents

---

 

NAME

l2test - L2CAP testing  

SYNOPSIS

l2test  

DESCRIPTION

l2test is L2CAP testing program.

 

USAGE

l2test <mode> [options] [bdaddr]

Modes:
  -r listen and receive
  -w listen and send
  -d listen and dump incoming data
  -x listen, then send, then dump incoming data
  -s connect and send
  -u connect and receive
  -n connect and be silent
  -y connect, then send, then dump incoming data
  -c connect, disconnect, connect, ...
  -m multiple connects
  -p trigger dedicated bonding
  -z information request

Options:
  [-b bytes] [-i device] [-P psm] [-J cid]
  [-I imtu] [-O omtu]
  [-L seconds] enable SO_LINGER
  [-W seconds] enable deferred setup
  [-B filename] use data packets from file
  [-N num] send num frames (default = infinite)
  [-C num] send num frames before delay (default = 1)
  [-D milliseconds] delay after sending num frames (default = 0)
  [-X mode] select retransmission/flow-control mode
  [-Q num] Max Transmit value (default = 3)
  [-Z size] Transmission Window size (default = 63)
  [-F fcs] use CRC16 check (default = 1)
  [-R] reliable mode
  [-G] use connectionless channel (datagram)
  [-U] use sock stream
  [-A] request authentication
  [-E] request encryption
  [-S] secure connection
  [-M] become master
  [-T] enable timestamps

 

AUTHOR

This manual page was written by Nobuhiro Iwamatsu <iwamatsu@debian.org>, for the Debian GNU/Linux system (but may be used by others).

---

 

Index

NAME

SYNOPSIS

DESCRIPTION

USAGE

AUTHOR

---

---

---